How To Remove Asbestos?

How To Remove Asbestos?

This substance is hazardous to your health. Even though its use has dropped off significantly, it is still in houses all over the world. With the real threat of it coming from it lying in wait, it could be anywhere and only be a threat if disturbed. This article explains how professionals do it, not a guide to show you how to do it. It heavily suggested that you hire a professional to take care of the substance. They would appreciate it that the ACs and heating systems turned off, to keep the fibers from circulating. The area will be sealed off to keep the asbestos contained. Professionals will use wet cleanup methods and HEPA filter vacuums to clean the area. Asbestos will put in obviously marked, leak-proof containers. When professionals are removing the material, they will have a mask on the covers their entire face. Each day they call it done, or when done with the job, they bag and contain all the used clothes. There will be a clean room for them before they can change into their regular clothes and go home to families.

Asbestos is a very deadly and slow killer. The effects this material has on your lungs are why the right people must remove this material. One of the many reasons they train people to take care of this substance is that it is fine and can get deep into your lungs just by one breath. Your safety is one of the main reasons they take great care when removing it. Read on asbestos testing for more information.

Essentials of Asbestos Training

cAsbestos, if disturbed or crumbling is one of the more dangerous of building materials.

Asbestos was used in building materials such as roofing tiles, ceiling tiles, floor tiles, brake pads, and insulation. It is possible as many as 80 percent of all buildings including hospitals or schools contain asbestos.

 When does asbestos become a problem? 

Asbestos becomes a problem when asbestos is friable, which means that the asbestos is easily crumbled by hand, releasing fibers into the air. Some asbestos products such as floor tiles are not a problem, but asbestos insulation, asbestos roofing, and other products are a huge problem.

The tiny fibers of asbestos get into the lungs and cause cancer. Nearly 107,000 people die per year from asbestos cancers, and over 55 countries have banned the use of asbestos products.

 So how do you test for asbestos? 

Asbestos is not easily recognized due to the small fiber size of the material. In order to test, samples must be taken and then sent to a lab where they will be examined under a microscope. The testing follows EPA 600 guidelines and involves using polarized light.

Samples for asbestos testing should be in an airtight bag such as the use of a larger and a smaller ziplock bag for double protection both from the air and from the samples escaping.

The folks who test the samples will be wearing a respirator.

You need a sufficient size sample as well. In general, a couple of squares, or a couple full of teaspoonfuls is often sufficient.

When collecting samples, a respirator should be worn.